|
03-14-2024, 06:57 PM
|
|
|
|
Join Date: Apr 2008
Posts: 5,675
|
|
Crossbows
Well due to major shoulder and bicep injuries I am in line for my crossbow permit for hunting starting this year.
I’ve done some research, but would like some hands on knowledge, nobody in Reddeer sells em that I know of..
Anyone in the same boat that can give me some insight how you got started?
I have a compound that I’ve used for years, but this is definitely uncharted waters for me.
Likely won’t hunt with one this year, practice will be the key all summer long, I do know a couple of people who both have xcaliber bows , look well made, and top of the line, I do however need to be schooled before I dump a lot of coin into one.
Any help would be appreciated. Thanks!!
__________________
Death can have me..... when it earns it..
|
03-14-2024, 07:35 PM
|
|
|
Join Date: Dec 2013
Location: ELKFORD BC
Posts: 365
|
|
crossbow
Look at RAVEN crossbows. Hand crank up and down. Cannot dry fire. Good speed. Mine is 420 fps and 1 1/2 inch groups at 100 yds. Very little learning curve beyond just getting it set up. Takes a while to nock up a second arrow just like any crossbow. Arrows(bolts) are Ravin specific. Finding a target that will stop a bolt under 30 yards is a challenge. With my Block target I get a full length capture at 30 yds--not fun to pull out even "lubed" up.
|
03-14-2024, 09:26 PM
|
Banned
|
|
Join Date: Mar 2015
Posts: 1,934
|
|
Ravin R10
100 %
I have the same issue and the R10 is the answer
If you in central AB , RD area
shoot mine
|
03-15-2024, 10:12 AM
|
|
|
|
Join Date: Nov 2009
Location: Calgary
Posts: 606
|
|
Excalibur. Can get up to 420fps (which is more than enough! You don’t need the ones that are hitting 500fps) and there are no cams, meaning no timing issues and you can easily change strings yourself. A string change on a Ravin or Tenpoint sets you back a couple hundred dollars while an Excalibur is about $40 for the string. Excalibur also makes some models which come apart in 1 second for easy and compact storage!
__________________
--------------------
Vegetarian is a latin word meaning "poor hunter".
|
03-16-2024, 09:12 PM
|
|
|
Join Date: Feb 2017
Posts: 1,114
|
|
The higher the fps the more finicky they are. I know a guy that kills moose with a 350fps Excalibur. Get one with or add on anti dry fire.
|
03-22-2024, 01:23 AM
|
|
|
|
Join Date: Oct 2009
Location: edmonton
Posts: 1,923
|
|
Excalibre is a great crossbow
I went with that because of the price of a raven
|
03-23-2024, 07:23 AM
|
|
|
Join Date: Mar 2009
Posts: 1,553
|
|
Man. I have killed a lot of stuff with my Cabelas ordered to door Centrepoint 370.
Also just bought a Barnett XP 390 w cranking device. Cannot go wrong. Let us know how expensive u go. Ravin at $3000.00 must be magical.
Sent from my iPhone using Tapatalk
|
03-23-2024, 03:30 PM
|
Banned
|
|
Join Date: Mar 2015
Posts: 1,934
|
|
Quote:
Originally Posted by reddeerhunter
Man. I have killed a lot of stuff with my Cabelas ordered to door Centrepoint 370.
Also just bought a Barnett XP 390 w cranking device. Cannot go wrong. Let us know how expensive u go. Ravin at $3000.00 must be magical.
Sent from my iPhone using Tapatalk
|
The Barnett xp is a very nice bow for the price but to compare it to a Ravin . I have had the xp home here and returned it . Why , I tried the Barnett is it weighs almost 3 lbs less than Ravin R10
The Ravin R10 can still be bought at about 1800.00 at cabelas .. The cranking system is totally different . Ravin has a one point draw back on the crank and can decock as well .. Any bow that can do this is well over 1500...
The ravin is heavy , but accurate . I can hit 3 in at 80 yards
|
03-23-2024, 06:35 PM
|
|
|
Join Date: Mar 2009
Posts: 1,553
|
|
Quote:
Originally Posted by Rio56
The Barnett xp is a very nice bow for the price but to compare it to a Ravin . I have had the xp home here and returned it . Why , I tried the Barnett is it weighs almost 3 lbs less than Ravin R10
The Ravin R10 can still be bought at about 1800.00 at cabelas .. The cranking system is totally different . Ravin has a one point draw back on the crank and can decock as well .. Any bow that can do this is well over 1500...
The ravin is heavy , but accurate . I can hit 3 in at 80 yards
|
I was giving a guy a cheap alternative and the only thing I have experience with. I am not comparing it to anything. I have never shot a Ravin. I buy 500$ crossbows and it kills like the $3000.00 ones is all I was implying. I do know the Barnett recurve limb ones that my friends shoot are loud but reliable. And the double arrow one is crazy accurate.
Thats all.
Rio56 you do you man.
|
03-23-2024, 07:26 PM
|
Banned
|
|
Join Date: Mar 2015
Posts: 1,934
|
|
The Barnett is fine ...
relax ...
The fact the Ravin can decock with the crank and the barnett cannot might interest the OP with shoulder problems is why I mentioned it
I was ready to swtich to a 500.00 cross bow
Last edited by Rio56; 03-23-2024 at 07:32 PM.
|
03-24-2024, 02:05 PM
|
|
|
Join Date: Dec 2022
Posts: 67
|
|
Quote:
Originally Posted by hayseed
I’ve done some research, but would like some hands on knowledge, nobody in Reddeer sells em that I know of..
|
I think my husband's buddy Dale at Sportsman's Den carries Excalibur. I know he's an authorized dealer...I buy my goodies from him.
When I bought mine years ago, I chose it because Excalibur is so bombproof. If you lose a string, you can change it right there in the field, whereas any compound will require you to bring it in to a place that has the press to do it. SO that equals lost time hunting. I've had mine (micro) for years now and it's a beautiful work of art, capable of laying down anything here in North America.
|
03-24-2024, 05:24 PM
|
|
|
Join Date: May 2007
Location: Calgary
Posts: 5,183
|
|
I'm in the same boat as OP. Picking up an Excalibur Rev x, they are throwing in a new case for free with select models until April 30. Excalibur bows can easily be decocked without firing them, they are simple and user serviceable, made in Canada to boot. Getting mine from Jimbows, great place to deal with and same price as the mega stores and online joints too. Good luck OP.
__________________
Former Ford Fan
|
04-11-2024, 11:05 AM
|
|
|
|
Join Date: Feb 2016
Location: Whitecourt
Posts: 883
|
|
My crossbow is an Excalibur Matrix Bulldog 400, which I bought at Cdn Tire.
Supposed to do 400fps with the 18" supplied bolts and 100gr heads.
But I shoot 20" Carbon Express Piledrivers, with 150 Excalibur Boltcutter broadhead.
With those bolts & heads my Bulldog 400 shoots 330fps verified/chronographed, and it blew the bolt right through a bull moose.
Speed is over-rated, accuracy is more important.
The only knock on the Bulldog 400 is it is a large crossbow.
Edit to add: I bought the Excalibur crank for cocking the string. It snaps onto any Excalibur crossbow and makes cocking/de-cocking a snap
Sept 18 2022, Swan Hills.
__________________
"Placed correctly Swift A-Frames will reliably kill big bears. So will North Forks, Nosler Partitions, Barnes TSX, Kodiaks, Woodleighs, GS soft points, Hornady Interbonds and Speer Grand Slams - and if I missed your favorite bullet -it probably will too.
It's time to go hunting and quit all this ballistic masturbation."
Phil Shoemaker
|
04-11-2024, 11:18 AM
|
|
|
|
Join Date: Feb 2016
Location: Whitecourt
Posts: 883
|
|
@ Hayseed
To get started you need to go to AB F&W and find the application form to get the crossbow exemption.
Fill that out with reason you need to able to use a crossbow, submit it and hopefully you will get approved with no hassle.
In my case I didn't know the process so started by consulting my doctor, who then sent me for xrays and tests on my shoulder.
The examination and xrays verified that my right shoulder is screwed, so my doctor then wrote a note to that effect.
Then I learned about the F&W exemption application. So when I submitted that I was able to attach the medical reports, doc's letter and my application got approved immediately.
But then finally, once you get the crossbow exemption approved, you got to go to the local hunting license place and buy the crossbow license.
After you have that crossbow license it will show up on your Alberta RELM with your other licenses, and it renews automatically then each year.
Overall it is a fairly simple process to go through.
If you were to apply and be refused the crossbow exemption, then the medical testing/proof would likely have to be done.
__________________
"Placed correctly Swift A-Frames will reliably kill big bears. So will North Forks, Nosler Partitions, Barnes TSX, Kodiaks, Woodleighs, GS soft points, Hornady Interbonds and Speer Grand Slams - and if I missed your favorite bullet -it probably will too.
It's time to go hunting and quit all this ballistic masturbation."
Phil Shoemaker
|
04-11-2024, 06:56 PM
|
|
|
|
Join Date: Apr 2008
Posts: 5,675
|
|
Thanks for all the helpful advice, I did actually obtain my license for my crossbow for life. So just an update, was in Cabellas last night and purchased an Excalibur Assassin Extreme, this rig is sick!! Left hand and right crank mechanisms, illuminated 30mm scope, going to fling some right now but it looks kick azz!! Got 15% off bow, 50 bucks off case and 4 free bolts
Bought 10 more and they gave me a deal on them as well… Ross at Cabellas was awesome to deal with and knows his bows. Good experience all around.
__________________
Death can have me..... when it earns it..
|
07-16-2024, 10:24 AM
|
|
|
Join Date: Dec 2008
Posts: 415
|
|
Quote:
Originally Posted by Demonical
@ Hayseed
To get started you need to go to AB F&W and find the application form to get the crossbow exemption.
Fill that out with reason you need to able to use a crossbow, submit it and hopefully you will get approved with no hassle.
In my case I didn't know the process so started by consulting my doctor, who then sent me for xrays and tests on my shoulder.
The examination and xrays verified that my right shoulder is screwed, so my doctor then wrote a note to that effect.
Then I learned about the F&W exemption application. So when I submitted that I was able to attach the medical reports, doc's letter and my application got approved immediately.
But then finally, once you get the crossbow exemption approved, you got to go to the local hunting license place and buy the crossbow license.
After you have that crossbow license it will show up on your Alberta RELM with your other licenses, and it renews automatically then each year.
Overall it is a fairly simple process to go through.
If you were to apply and be refused the crossbow exemption, then the medical testing/proof would likely have to be done.
|
After you have that crossbow license it will show up on your Alberta RELM with your other licenses, and it renews automatically then each year.
I've had a Crossbow permit exemption for 8 years ,, initially you had to reapply at 5 years though now its auto renewal for life .
I have never heard of buying a crossbow license at a local vender and submitting to F& W .
I have a buddy just got his exemption 2 years ago and want asked to purchase a license .
Never been asked or had to look for one .
is this real thing and for how long ?
|
07-19-2024, 01:13 AM
|
|
|
|
Join Date: May 2007
Location: WMU 303
Posts: 8,542
|
|
Lifetime cross-bow license
You don't buy a crossbow license. Once your application is approved through the process it appears on your licenses in alberta relm as "Lifetime Cross-bow License". It expires after 5 years and automatically renews itself. No money is exchanged for this. You print it and you're done or you can produce it from the albertarelm app without printing a copy. Mine was just renewed to expire in 2029.
|
08-08-2024, 05:03 AM
|
|
|
|
Join Date: Feb 2016
Location: Whitecourt
Posts: 883
|
|
My initial crossbow license cost me $5, which I think I paid through Alberta RELM.
But I haven't paid it since.
__________________
"Placed correctly Swift A-Frames will reliably kill big bears. So will North Forks, Nosler Partitions, Barnes TSX, Kodiaks, Woodleighs, GS soft points, Hornady Interbonds and Speer Grand Slams - and if I missed your favorite bullet -it probably will too.
It's time to go hunting and quit all this ballistic masturbation."
Phil Shoemaker
|
08-08-2024, 06:15 PM
|
|
|
Join Date: Aug 2007
Posts: 339
|
|
I thought it was nearly impossible to get crossbow license? Stories of have to be severely damaged such as amputation were exaggerated I guess.
|
08-09-2024, 02:37 PM
|
|
|
|
Join Date: May 2007
Location: Fort Sask, AB
Posts: 4,992
|
|
Was in the process of this application, and my Physio gal was helping me with the forms, however her professional opinion was that my elbow and shoulder condition was not permanent, so my app was denied.
I would’ve been upset about that if my physical condition become worse or was in the same state.
But all has come around in the past two years.
So no real complaints from me in this process.
I have no disability crossbow license, but elbow and shoulder are now working fine.
TBark
|
08-09-2024, 10:41 PM
|
|
|
Join Date: May 2007
Location: Calgary
Posts: 5,183
|
|
Buddy, I'd trade places with you in a heartbeat, I loved shooting my bow but that ship has sailed so I will make the best out of my Excalibur Rev X
__________________
Former Ford Fan
|
08-11-2024, 08:31 AM
|
|
|
Join Date: Dec 2008
Location: Camrose
Posts: 46,599
|
|
I don't have a great deal of experience with crossbows, but I did get to try a Ravin at our range and it was a lot closer to shooting a rifle, than a bow. There as no learning curve, just load it, place the crosshairs on the target, and bulls eyes were fairly easy at 100y. It was heavy and expensive, and it was a pain to remove bolts from the target, but killing game out of a blind would be very possible to 100y.
__________________
Only accurate guns are interesting.
Last edited by elkhunter11; 08-11-2024 at 08:42 AM.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 04:31 PM.
|