Go Back   Alberta Outdoors Forum > Main Category > Archery Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 08-09-2023, 11:20 PM
Desert Eagle Desert Eagle is offline
 
Join Date: Dec 2008
Location: GP
Posts: 1,012
Default Broadheads

I wanted to share an interesting experience with broadheads tonight. My bow has been tuned and shooting excellently with field points and great groups at 70-80 yards. Had a friend help and we Did some bare shaft tuning prior to getting out this far, and was getting no tears, nice straight holes.

Trying fixed blade broadheads over the past while and I couldn’t get any to stick with my field points until I got to the Montec G5. Only shot to 40 due to where we were, but they were bang on.

Others tried were muzzy, slick tricks, thunderheads, toxic and I believe one other. I also have some grim reaper mechanicals that shoot really well, but was hoping for fixed blade.

I found it interesting how some can fly significantly different than others. I’m sure if I was more up to speed on tuning, I am sure that I could have made some others work, I just didn’t want to start messing with stuff when it was working so well.
Reply With Quote
  #2  
Old 08-10-2023, 11:41 AM
Iceberg Iceberg is offline
 
Join Date: Sep 2012
Location: North
Posts: 88
Default

Did you do a spin test on all the broadheads with each arrow to ensure they’re spinning true? A slight wobble can effect the outcome downrange even out of a well tuned bow!
Reply With Quote
  #3  
Old 08-10-2023, 07:00 PM
phenom0983 phenom0983 is offline
 
Join Date: Jul 2013
Posts: 15
Default

I know the thunderheads and slick tricks are vented… any difference with the montées? Maybe it steers better due to air through the blades? We’re you grouping with broadheads, just not aligned?
Reply With Quote
  #4  
Old 08-11-2023, 11:50 PM
Desert Eagle Desert Eagle is offline
 
Join Date: Dec 2008
Location: GP
Posts: 1,012
Default

Quote:
Originally Posted by phenom0983 View Post
I know the thunderheads and slick tricks are vented… any difference with the montées? Maybe it steers better due to air through the blades? We’re you grouping with broadheads, just not aligned?
They were grouping similar, but about a foot left.

The montec is vented quite a lot more, not sure why the difference, but found it interesting.
Reply With Quote
  #5  
Old 08-11-2023, 11:52 PM
Desert Eagle Desert Eagle is offline
 
Join Date: Dec 2008
Location: GP
Posts: 1,012
Default

Quote:
Originally Posted by Iceberg View Post
Did you do a spin test on all the broadheads with each arrow to ensure they’re spinning true? A slight wobble can effect the outcome downrange even out of a well tuned bow!
I did not do a spin test. Something good to know.

I did find one of the montecs was out on target, and threaded it into another arrow and it seemed to fly a lot better. Interesting how a small alignment change compared to the vanes helps.
Reply With Quote
  #6  
Old 08-12-2023, 12:09 PM
SouthWestRanger SouthWestRanger is offline
 
Join Date: Feb 2019
Posts: 380
Default

Form also matters a lot more with fixed blade broadheads, spin tested arrows, good form, and a tuned bow and most well made broadheads will fly for you.
Reply With Quote
  #7  
Old 08-12-2023, 01:10 PM
3blade's Avatar
3blade 3blade is offline
 
Join Date: Aug 2011
Posts: 5,348
Default

Quote:
Originally Posted by Desert Eagle View Post
I did not do a spin test. Something good to know.

I did find one of the montecs was out on target, and threaded it into another arrow and it seemed to fly a lot better. Interesting how a small alignment change compared to the vanes helps.
There it is

You will find out very quickly that there’s a whole bunch of variation even when using ASD prepped arrows, precision machined outserts and good quality broadheads

It’s normal to switch a broadhead through 2-3 arrows before finding a perfect match that spins true
__________________
“Nothing is more persistent than a liberal with a dumb idea” - Ebrand
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:53 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.