Axcel landslyde sights? Anyone use it?

[Irina]

Would like to know a review if anyone uses it on their bow here, thanks. I’m wondering about the accustat one.

What’s everyone’s pin size preference .10 or .19? Pros and cons. Hoping to shoot targets 80-100 yards.

[elkoholik]

I have 2 landslides and really love them. Smooth and solid. If you are going to go single pin for those distances definitely go .19, the .10 is good for most eyes to about 50yrds. If you custom order a 3 pin then you can go .10/.10/.19 for your distance pin. Good luck and enjoy, you won't be disappointed.

[Irina]

Originally Posted by elkoholik

I have 2 landslides and really love them. Smooth and solid. If you are going to go single pin for those distances definitely go .19, the .10 is good for most eyes to about 50yrds. If you custom order a 3 pin then you can go .10/.10/.19 for your distance pin. Good luck and enjoy, you won't be disappointed.

Yes I was going to go with a 3 pin. Did you find yours in a store in Alberta or order yours? I would like to see one before ordering one.

Does your sight tape max out to 100 or can you get one that goes out further for the landslyde.

[elkoholik]

I picked mine up at Jumbo's in Calgary, either Jumbo's usually have them in stock but you will only get .10 or .19 pins, if you custom order then you can order your pin and colour preference. Should be able to them out at Jumbo's or if you are in Calgary let me know and I can meet you at a shop. The 100yrd is all dependant on your set up your draw length/ Peep location and arrow speed will all have an effect on your yardage availability. I shoot short draw and slower speed, my 27.5" DL with 280fps and I can just get 100yrds without fletching contact.