 |
09-17-2024, 11:43 AM
|
 |
|
|
Join Date: Sep 2016
Posts: 84
|
|
Rod repair
Hello folks.
The end cap of my fly rod has come off. Any idea as to what’s the best glue to to stick it back on? I don’t want to send it all the way down to Orvis for something like this.
Thanks
|
09-17-2024, 01:42 PM
|
|
|
|
Join Date: Oct 2012
Posts: 388
|
|
For me what I would use is an epoxy type glue. Clean off the old glue from the rod seat and make sure it is clean. Mix the epoxy and apply it to the rod and the end cap. Clean up the excess glue and let it sit till it is dry. Would use a glue that has some set up time, just in case you have to move the seat till it is sitting perfectly. Also may want to use some masking tape to make sure it does not move till it has dried.
|
09-17-2024, 02:32 PM
|
 |
|
|
Join Date: Nov 2008
Posts: 11,621
|
|
Quote:
Originally Posted by britman101
For me what I would use is an epoxy type glue. Clean off the old glue from the rod seat and make sure it is clean. Mix the epoxy and apply it to the rod and the end cap. Clean up the excess glue and let it sit till it is dry. Would use a glue that has some set up time, just in case you have to move the seat till it is sitting perfectly. Also may want to use some masking tape to make sure it does not move till it has dried.
|
This is what is used, two part exoxy use a 24hr one.
__________________
“One of the sad signs of our times is that we have demonized those who produce, subsidized those who refuse to produce, and canonized those who complain.”
Thomas Sowell
|
09-19-2024, 09:16 AM
|
|
|
|
Join Date: Dec 2007
Location: Central Alberta
Posts: 1,807
|
|
To add:
Use pipe tape wrapped at the metal wood joint to make sure epoxy doesn't migrate onto wood. Los of masking tape as well.
Epoxy type doesn't matter.
Don
|
09-19-2024, 06:45 PM
|
|
|
|
Join Date: Sep 2016
Posts: 84
|
|
Thank you for all the good advice everyone.
|
09-21-2024, 09:52 AM
|
|
|
|
Join Date: Dec 2007
Location: St. Albert, Alberta
Posts: 168
|
|
My only question for you would be what model of Orvis Rod and what guarantee did it come with? the reason I ask, is that the cost of repair/warranty is built in to the price of the Orvis rod.
I have a number of Orvis rods with 25 year warranties that have had issues and have sent them for repair and more often than not, they will just send you a new rod, unless you specify you want the old one back.
Best of luck whichever way you go!
|
09-21-2024, 06:49 PM
|
|
|
|
Join Date: May 2007
Location: Edm.
Posts: 5,282
|
|
Have you tried some thing simple like crazy glue .
|
09-21-2024, 06:51 PM
|
|
|
|
Join Date: May 2007
Location: Edm.
Posts: 5,282
|
|
Have you tried some thing simple like crazy glue ,wood glue or epoxy .If its metal to some type of plastic it should work fine .
|
09-21-2024, 06:53 PM
|
|
|
|
Join Date: May 2007
Location: Edm.
Posts: 5,282
|
|
Have you tried some thing simple like crazy glue ,wood glue or epoxy .If its metal to some type of plastic it should work fine .
Or you can always take it to the Reel Doctor
|
09-21-2024, 08:33 PM
|
|
|
|
Join Date: Sep 2016
Posts: 84
|
|
I used a 24 hr epoxy. I guess I should have sent it in to Orvis. I might have gotten a new rod. Last time I had a rod break, they just sent me a new one.
|
09-21-2024, 10:09 PM
|
|
|
|
Join Date: May 2007
Location: Edm.
Posts: 5,282
|
|
Sounds like its all fixed now . No downtime waiting ,now you can go hit some streams ! enjoy
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 04:49 AM.
|
Linear Mode
