.280 Rem Load Data Request Hornady ELDX

[Cory]

Hey all, my Hornady 9th edition does not cover this bullet. Looking for printed data info specific to the 150gr ELD-X in my .280 Rem. Powders will most likely be IMR-4350 and IMR-7828SSC.
Thanks in advance.
Cory

[wayne]

Hey Cory, I asked this same question a while ago and the answer given was to just use the 9th edition data for the 154 grain Bullets chart. It has worked well for me with the Hornady 150 grain ELDX with no issues, using RL 19 data over the 54grain mark I am getting .7 accuracy at 100 yards.

[Cory]

Originally Posted by wayne

Hey Cory, I asked this same question a while ago and the answer given was to just use the 9th edition data for the 154 grain Bullets chart. It has worked well for me with the Hornady 150 grain ELDX with no issues, using RL 19 data over the 54grain mark I am getting .7 accuracy at 100 yards.

Thank you sir. Exactly what I needed to know.
Cory

[obsessed1]

Here you go

[Cory]

Originally Posted by obsessed1

Here you go

Thank you. Tough to read clearly but it appears to match up exactly with my 9th edition, so all good.
Thank you.
Cory

[obsessed1]

Yes same data as #9