Fierce 300 prc load help

[TJhecox]

I’m struggling to find much data on reloading my 300 prc I have reloader 33 that I would like to use, but mainly because I can’t get anything else currently...

[astepanuk]

Have you bought Bullets yet or you looking to start from scratch. I would look at www.hodgdonreloading.com and figure it our from there. I would say a 210Grain bullet would be perfect.

[hawk-i]

Im using 245 Berger EOL's ...start at 81 grs of rl-33 and go from there.

I think max was around 88 grs.

[astepanuk]

Looking at the load data I don't think you would be able to fit 88Gr of powder in the casing. I'd say Max gr would be around 76.

[hawk-i]

88 grs will fit in a 300prc

[hawk-i]

if you call Berger they will give you 300prc load data with different powders verbally but wouldn't send it by email.

[hawk-i]

Here is Bergers no. 660-460-2802 between 8am-4:30pm

Just checked my notes and yep 88 of rl-33 was max with the 245's

[.264 Win Mag]

I’ve got some H1000 that I’m hoping to try out for my fierce 300 PRC here fairly soon. Heard that’s a good place to start but we will see

[marky_mark]

N570 would be good too

[hawk-i]

Originally Posted by marky_mark

N570 would be good too

When I use up some of my RL-33, Retumbo, H1000 and RL-26 I'm going to try both N565 and N570...