1) How far do you put the transducer down your hole? My manual indicated it should only be 1-2 inches down however this way you will read and see a lot of ice at the top
You may have misread your manual, the transducer is supposed to be near the bottom of the hole, like 1 to 2 inches from the bottom would be optimal and I'm guessing that's how the manual should read.
2) What is the typical range setting that should be used? I was on slave few weeks back and had to use it between 5-6 just to see my hook coming up and down.
Do you mean gain? I don't have that model but usually you should increase the gain till you can just see your hook as a solid line. The actual number is not important, what you see is more important on the screen.
3) What is the minimum depth that you think that these flashers should be used at? Is it pointless for 5-6'? I was using mine at 12-15 FOW
I've used mine in 4 feet of water under the ice. You basically see the fish right before it hits. Gives you a second or two to get ready. I still think it is worth it. Usually more that 7 or 8 feet works pretty well.
Hope that answers your questions.
|