|
10-16-2023, 11:18 AM
|
|
|
Join Date: Apr 2008
Location: calgary ab
Posts: 2,703
|
|
Canning
Got a bunch of fish to can (jar) Any hints, thoughts to get it right? Never done before. In-laws always done for us. Now it's my turn. Will be using the smaller jars. Do you add any flavor or spice to Kokanee? They are frozen but for sure will thaw. Guess I can go on line and figure it out. Just looking for some experienced input
|
10-16-2023, 12:16 PM
|
|
|
|
Join Date: Oct 2011
Location: Westerose
Posts: 4,239
|
|
Never done fish, but I just checked my Complete Guide to Home Canning
They say to rinse the thawed fish in cold water. You can add vinegar to the water (2 tablespoons per quart) to help remove slime. After you remove the head, tail. fins and scales, wash and remove all blood.
For salmon it is not necessary to remove skin and bones.
Quote:
Cut clean fish into 3-1/2-inch lengths. [...] Fill hot pint jars, leaving 1-inch headspace. Add 1 teaspoon of salt per pint, if desired. Do not add liquids. Careful clean the jar rims with a clean, damp paper towel; wipe with a dry paper towel to remove any fish oil. Adjust lids and process. Fish in half-pint or 12-ounce jars should be processed for the same amount of time as pint jars.
|
If you have a weighted-gauge pressure canner, you want 15 lb if your altitude is >1,000ft (isn't that pretty much all of Alberta?) and 10 lb if <1,000ft. Process for 100 minutes.
If you are using larger jars there is a different procedure for heating and venting the canner.
ARG
__________________
In the immortal words of Jean Paul Sartre, 'Au revoir, gopher'.
Quote:
Originally Posted by sjemac
It has been scientifically proven that a 308 round will not leave your property -- they essentially fall dead at the fence line. But a 38 round, when fired from a handgun, will of its own accord leave your property and destroy any small schools nearby.
|
|
10-16-2023, 04:01 PM
|
|
|
|
Join Date: Jan 2012
Location: On the border in Lloydminster
Posts: 8,482
|
|
The vinegar will dissolve the bones or at least soften them up, add a little ketchup for color.
After pressure cooking let the pot cool down on it's own, if the pot cools down faster than the jars all the liquid will be ejected ask me how I know that.
I've done a lot of jack never had any salmon to try, I use the the hot pack method adding liquid
__________________
Si vis pacem, para bellum
Last edited by bat119; 10-16-2023 at 04:23 PM.
|
10-16-2023, 04:13 PM
|
|
|
Join Date: Apr 2009
Location: Bonnyville
Posts: 422
|
|
Don’t add any salt as you can always add salt just before eating. I canned a bunch of trout last night but removed the skin and all the bones as I don’t like eating them. Half of the batch was plain Jane and the other half got a teaspoon of ketchup in them. Will be canning another batch this evening and will put a peppercorn in half of them but am undecided on the other half.
|
10-16-2023, 05:13 PM
|
|
|
Join Date: Feb 2021
Posts: 438
|
|
We used to can a ton of salmon when we lived on the coast.
500 ml jars mostly.
I always added a teaspoon of coarse salt. We also like a red sauce, like sardines in tomato sauce type thing. So I used to mix a few of the tins tomato paste, "garlic and herb" with a jar of spaghetti sauce. Add a few table spoons on top of the fish before closing. Sauce itself was too thin, so the paste thickened it nicely, and the paste itself was too thick.
I always deskinned, but that is only a personal preference. Others enjoy it with the skin on.
|
10-16-2023, 05:24 PM
|
|
|
Join Date: Apr 2008
Location: calgary ab
Posts: 2,703
|
|
Thanks for the info. It gonna be a trial run for the first few. Perfection might take a bit. Will leave skin on and bone in. Vinegar sounds like the way to go to dissolve the bones. Will it take a few months for the bones to dissolve in the jars?
|
10-16-2023, 11:20 PM
|
|
|
Join Date: Dec 2008
Location: GP
Posts: 1,012
|
|
Quote:
Originally Posted by Au revoir, Gopher
If you have a weighted-gauge pressure canner, you want 15 lb if your altitude is >1,000ft (isn't that pretty much all of Alberta?) and 10 lb if <1,000ft. Process for 100 minutes.
If you are using larger jars there is a different procedure for heating and venting the canner.
ARG
|
Just wanted to confirm altitude… west central AB where I was previously is 2750 ft above sea level, and GP is 2200 ft.
When I worked West of DV we actually were at 3650 feet which lead to a lot of issues when specking equipment, as most people missed the elevation factor.
|
10-17-2023, 06:49 AM
|
|
|
Join Date: Apr 2008
Location: calgary ab
Posts: 2,703
|
|
I'm in Calgary and will be using 500ml jars. In-laws gave me the pressure cooker it's a Presto Deluxe. Lots of prep to do to get jars and lids ready. Gonna thaw the fish today. Just gonna do a few jars to start, see how it goes
|
10-17-2023, 08:38 AM
|
|
|
Join Date: Jan 2009
Location: Tilley Alberta
Posts: 322
|
|
canning salmon
We finally bit the bullet and learned how to can salmon. We bought an All American 930 pressure canner. My wife wanted to use 6 oz cans so we had to buy a hand crank machine to put the lids on and the cans.
We put 1/4 teaspoon of sea salt, 1 tablespoon of avocado oil, 1 teaspoon of vinegar, and 1 teaspoon of lemon juice.
Turned out delicious.
Jim
|
10-17-2023, 09:41 AM
|
|
|
Join Date: Oct 2011
Posts: 81
|
|
canned salmon
we can lots of salmon, for a pint jar fill with salmon chunks including skin and bone add a teaspoon each of oil, salt and vinager and follow the directions.
|
10-16-2023, 06:56 PM
|
|
|
Join Date: May 2009
Posts: 1,562
|
|
I've canned hundreds of Salmon jars and I think you have some good advice here.
Suggest reading the Ball book for pressure canning.
I have tried a few olive oil infused flavors like garlic and truffle. Meh. They turned out ok but I prefer to add those flavors later. I do recommend at least 1/2 tsp of salt per quart of fish. It will be very bland othwise and more difficult to balance the flavors with other ingredients in a recipe. Adding salt afterwards doesn't have the same effect in my experience.
Skin on and all but the largest salmon bones will desolve. That's the good stuff don't throw it out!
Last edited by Duramaximos; 10-16-2023 at 07:07 PM.
|
10-16-2023, 07:11 PM
|
|
|
|
Join Date: Jun 2009
Posts: 313
|
|
Quote:
Originally Posted by Duramaximos
I've canned hundreds of Salmon jars and I think you have some good advice here.
Suggest reading the Ball book for pressure canning.
I have tried a few olive oil infused flavors like garlic and truffle. Meh. They turned out ok but I prefer to add those flavors later. I do recommend at least 1/2 tsp of salt per quart of fish. It will be very bland othwise and more difficult to balance the flavors with other ingredients in a recipe. Adding salt afterwards doesn't have the same effect for in my experience.
Skin on and all but the largest salmon bones will desolve. That's the good stuff don't throw it out!
|
Completely agree with what you said including the 1/2 tsp of salt for the 500mL jar. I add a few aromatic herbs also...
|
10-16-2023, 10:55 PM
|
|
|
Join Date: May 2009
Posts: 1,562
|
|
Here is a quick and easy canned salmon recipe that should work just as well with kokanee.
1 pint of fish
1/2 cup of mayo - preferably home made using a good quality evo
1 zest of lemon - dont grate the pith it will impart a bitter flavour
1 lemon juice
1 garlic clove minced
1/3 red onion finely chopped
1/3 cup finely chopped dill weed
1 tbsp maple syrup
1/2 tsp lemon pepper or black pepper
1/2 tsp liquid smoke
Salt to taste
Combine all ingredients well. If it is a little dry add a touch more mayo. Rest for 4 hours in the fridge. If you prefer a healthier alternative to mayo, sub greek yogurt.
I like to serve with sliced sourdough baguette.
|
10-16-2023, 07:06 PM
|
|
|
Join Date: May 2009
Posts: 1,562
|
|
Very important to thaw completely before canning. The only jar failures I experienced were from using partially thawed meat that I thought was thawed enough...probably 95%. Any amount of frozen meat will cause the glass to fracture.
|
10-17-2023, 08:03 PM
|
|
|
Join Date: May 2009
Posts: 1,562
|
|
No vinegar for me. Haven't found the need to use it except to wipe the jar rims clean of oils.
Sent from my SM-G990W using Tapatalk
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 08:29 AM.
|