what cartridge should I have built with a standard action model 70.

[Ballertrawler II]

Well the 27 Nosler idea is out as i did not do enough research and my donor action wont work. it is a Model 70 chambered in 270 Win currently

So that opens it up... With what I already have I was thinking of the following but am open to suggestions as well I want something over 3200 fps or faster

from 6mm to 7mm.

Some of things I am thinking of are

6mm -06AI
6mm-280AI
280 AI

I have a 270 WSM and 300 WSM, which is why i am looking for 6mm

[elkhunter11]

25-06, or 6.5-06 would be worth considering.

[1dayillgetaram]

6.5 or 338 rpm

[brewster29]

25-06 ai.

[bat119]

280 ai

[Engels]

im with elk on this one. 6.5-06 could be a cartridge that could check the boxes for you.

[rugerfan]

240 Weatherby would be an option as well, would give you something with factory cases available.

[sns2]

I've always felt that a 6.5-06 would be an excellent, fairly low recoiling round.

[Dick284]

30 Gibbs
35 Whelan Improved.
338/06 AI

[catnthehat]

I have owned dozens of 6.5 rifles using the " standard "
( 308 sized) case head , most were fantastic.
The 6.5/06 was one of the best and would do another in a heart beat.

Going up to 7mm, I really like the 280 Remington and the 280AI
Cat

[MountainTi]

Originally Posted by 1dayillgetaram

6.5 or 338 rpm

Good choices

[Smokinyotes]

Why change anything. What are you expecting to gain?

[JD848]

Originally Posted by Smokinyotes

Why change anything. What are you expecting to gain?

X2

[catnthehat]

Originally Posted by Smokinyotes

Why change anything. What are you expecting to gain?

Probably something different, not necessarily better
Cat

[Pathfinder76]

Originally Posted by JD848

X2

X3

It will hold 5 down, feed like it should and with 117gr hammers will get 3200fps.

You could throw a 26” barrel on it, a Bansner Miller stock, and Sunny hill bottom metal.

[rugerfan]

If you’re dead set on that 3200 as a minimum velocity it’s going to limit your choices. A couple of the 6.5s would in the right barrel length, or the 280 AI but you will need to stick to lighter bullets.

[cowmanbob]

Keep the 270 win and use 110 grain bullets. With MRP powder I’ve gotten 3400 FPS.

[obsessed1]

I'd stick to the 270 myself. Given your cartridge stable though I'd go 338-06 or 35 Whelen but you won't meet your velocity goal with either.. 6.5-06 is the only " change" that would make sense and meet your velocity requirements but candidly it won't do anything better than your two chamberings you already have.

[fps plus]

6-284
6mm Ackley
240 Wby mag

I have used the 3 above and currently use
The 240 Wby.

[1dayillgetaram]

Originally Posted by MountainTi

Good choices

Brass dies and even factory ammo available if needed
Plus they are essentially a higher capacity 284 win case which is a proven winner

[W921]

Originally Posted by Pathfinder76

X3

X4

[J.B.]

I guess that really depends on your intended use of the rifle, and which bullet you would like to shoot.
Hunting with monos, speed is your friend. Go 240wby.
Hunting with bonded 6.5-06, 6.5-284 norma.
280ai is a good option if you prefer slower C&C style bullets.
At the speeds you mentioned I think the 6.5s will land right where you wanted.

[MountainTi]

Originally Posted by 1dayillgetaram

Brass dies and even factory ammo available if needed
Plus they are essentially a higher capacity 284 win case which is a proven winner

The 6.5 RPM is pretty zippy as well. Sounds like what the OP is looking for

[Mr.Piker]

6mm-06

[ghfalls]

Doesn’t the 270 wsm get you there? My vote is also 338-06

[HL_transplant]

240 Weatherby

[FlyTheory]

Cartridges are like opinions, everyone has one. I think the 25-06 was mentioned and a great option. 6mm creedmoor would be cool too.
Don’t let us on here tell you what to get though, do what peaks your interest! That’s what I’m doing for my rifle build. But also, if what you have works, keep no need to fix it unless you wanna do some tinkering!

[MountainTi]

You are looking for something over 3200 fps in a capable hunting round correct?